- handling machine to should take put down gently, move the compressor cooling water machine, should try to keep it upright moving, if you want to, it shall not be greater than 45 degrees, and after moving to rest after a period of time, before work.
- When using the water dispenser for the first time, clean all the containers and pipelines of the water dispenser with clean water, then open the drain valve, and tighten the drain valve after discharging the remaining water in the machine.After adding the large bottle of water, turn on the hot water tap, plug in the power supply and turn on the heating switch after the water flows out, so as to avoid dry burning and extend the service life of the machine.
- water pilot time to stop using, please shut down the machine switch and plug the power supply, then open the drain valve, the residual water in the machine, and then screw down the drain valve (please note that the hot water scald) in the process of drainage.
- It is better to turn off the power when not in use at night, which can save energy and ensure the safety when not in use.
- During the use of the machine, it is recommended that the machine be cleaned and disinfected once every 3 months or so according to the specific situation and be used for one year. Professional maintenance personnel can be invited to clean smart seat and inner bladder.
- The water dispenser should be placed in a ventilated place to prevent moisture, avoid direct sunlight and keep away from heating.Should be 15 centimeters away from the wall and should not put the water fountain near valuable furniture and other household appliances, so as not to splash damaged goods.The water dispenser must be placed smoothly to prevent the machine from making noise.
- It is forbidden to use gasoline and other organic solvents to clean the machine surface.
- If the power cord is damaged, the water cooler must be replaced with special soft cable or contact the distributor.The machine must use a socket with a grounding device and a leakage protector to prevent the case from being charged.
- Children should not play near the water fountain. If necessary, they can change the hot water tap into a safety tap to prevent scalding the child.
- Do not put metal rod into the back panel ventilation window to avoid damaging the fan or causing electric shock.Do not cover fan ventilation Windows to avoid damage to semiconductor refrigeration components due to poor ventilation and heat dissipation.
- When the water cooler is cooled by the compressor, it needs 3-5 minutes to start up again after the cooling power is disconnected, so as to extend the service life of the machine.
- When touching the tap, do not exert too much force, so as not to release or damage the rotating part by hand.
